How to hack a website using cmd

In this post we will show you how to hack a website using cmd. Note that this will work only on low security sites  with poor servers. You need to follow these steps:-
Step 1) Open cmd and type ping www.websitename.com
This will give you the IP Address of the website you pinged.
Step 2) Then type 11.22.33.ip.44 -t -l 6500
Your screen would look like this
pinging 11.22.33.ip.44 with 6500 bytes of data
pinging 11.22.33.ip.44 with 6500 bytes of data
pinging 11.22.33.ip.44 with 6500 bytes of data 
pinging 11.22.33.ip.44 with 6500 bytes of data
pinging 11.22.33.ip.44 with 6500 bytes of data 

If the siite is to protected , it would do like this
Server Timed Out
Server Timed Out
Server Timed Out
Server Timed Out
Server Timed Out

This is also known as CMD Flood Attack.

Note:- This post is for educational purposes only. Howcrunch is not responsible for any damage caused.

Read More

How to get approved by google adsence

Google adsense, which may look like some alien word to the bloggers who are pretty new to blogging and they are worried about getting approved and some even feel very tensed and confused to apply for adsense. 
As a blogger i don’t say that getting approved by adsense is neither easy nor impossible.
There is no magic in getting approved by adsense, but by following some simple and important steps you will be approved by adsense easily(at least with 90% success).
Before applying to adsense make sure that your site meets the minimum requirements(These are just my personal recommendations which are based on my personal experience and Google's terms.)

1) The first, important and compulsory step is to have an email account with Google, if you don’t have one you can get one from gmail.com
2) 40+ posts, I say this because Google loves content and mostly, adsense shows contextual based ads so it is required to have a minimum number of posts(60+ post are recommended)
3) A top level domain(ex: yoursite.com), You will also be approved if you don’t have a top level domain but it is recommended to have your site with a top level domain. If you can’t afford to buy a top level domain you can get one for free from http://www.co.cc
4) Your website must be fully constructed and is at least 6 months older.
5) As Google loves content make sure that your website/blog dose not contain any copied content i.e your content must be original and it should not be copied from any websites or blogs or forums etc..,
6) Make sure that your site contains no broken link because Google adsense will not approve if there are any broken links in your site.
7) One of the most important is to have a privacy policy for your website and must be visible for your website or blog visitors. There are many free services like this onehttp://www.serprank.com/privacy-policy-generator/ by which you can create your own privacy policy(this requires no wonder skills).
8) Submit your address correctly because Google will verify your address by sending their PIN number. It is also required to send you your check’s of your income(if you have been approved).
9) Your site must not be a site which speaks about gambling, adult or porn content etc.., 
Even though, some lucky bloggers may get approved disregarding of 3, 4 and 5 points. But remember that they are just lucky and if Google adsense realizes that, their account may be suspended(it happened to one of my friend). So, before applying to Google adsense make sure that your website meets the minimum standards.
If you think that your site meets the above requirements you can apply for Google adsense by going here https://google.com/adsense. Your application will be reviewed by adsense team with in 24 to 72 hours.

Read More

How To Block Websites in Windows PC

Just go through the below website :-

1. pen your windows explorer and navigate to C:\Windows\System32\drivers\etc if you have not installed on your C: drive then substitute this letter for the drive letter where you have installed the windows
2. Now double click hosts and select Notepad at windows prompt. If you don’t receive prompt and opens in another file then right click the hosts file and select open with to select the Notepad
3. Now place the cursor at the end of the last line which says something similar to 127.0.0.1 localhost or ::1 localhost. Press Enter to create a new line
4. In the line type 127.0.0.1 and then tap the spacebar once and then type the address of the website that you want to block. For example if you want to block Youtube then type 127.0.0.1 www.youtube.com
5. You continue adding websites to the lists for blocking them. Each website name should be prefaced with 127.0.0.1 and a space
6. Now click on File and save to save the changes that you have made. Ignore any warnings that you may receive which might be due to editing the hosts file
7. Now close any browser windows that might have been open and restart them and input the websites name that you have blocked to check whether you can access the website or not.
8. If correctly done the blocked website should not be displayed in any browser.

NOTE :- Howcrunch is not responsible for any damage.

Read More

How To Create Desktop Shortcuts In Ubuntu

1. You need to install the required packages by opening the terminal window and entering the following commands sudo apt-get install –no-install-recommends gnome-panel
2. Enter your password when prompted
3. Enter “Y” when asked after it shows the packages that will be installed and how much disk space will be used.
4. After the installation is done you can use the following command in the command line to create new shortcuts gnome-desktop-item-edit –create-new ~/Desktop
5. When the shortcut is being the dialog box will display it and also make sure to select the application form the type drop down list
6. Enter the name of the shortcut in the name edit box and you can also browse button to select the command.
7. Make sure the programs executable are installed in /usr/bin
8. The moment you close the create launcher dialog box you will be returned to the terminal window where type exit and press enter to close the terminal window
9. The shortcut displays on the desktop just like windows shortcuts
10. You can also create shortcut by pressing Alt + F2 which will show the edit box and enter the commands it-create-new~/Desktop
11. You can also add shortcuts to your desktop to unity launcher by dragging and dropping the launcher

Read More

How to lock any folder in Windows without any Software

You just have to follow these steps given below:-

Step 1) Make a Folder in C drive rename it as "abc" without quotes.
Step 2) Now open Command Prompt from Start Menu.
Step 3) Type "attrib +s +h C:\abc" without quotes and press enter.
Step 4) This command will Make your folder invisble and it can not be seen even in hidden files and folders.
Step 5) To make it visible again type "attrib -s -h C:\abc".
Step 6) You can lock any other folder also by changing the location C:\abc to address of your folder.

Read More

How to Download Youtube Videos Via Google Chrome

If  Google Chrome  is your favourite browser on the internet, then you can use one of its extensions that function displays the download button when you open the youtube video page on the site and helps you to download youtube videos.The extension name is Chrome Youtube Downloader.Go through the following steps :-

1. Open Google Chrome
2. Visit ChromeExtensions.org to install Chrome Youtube Downloader
3. Then click the Add button to Chrome to install on the browser Chrome / Chromium you use. The button is in the upper right (which signs +)
4. After successful installation, you will be taken on the settings page. Just select ‘Classic Download’ on the Style Button option.
5. Visit Youtube video page (which you want to download of course). It would appear the button to download that is located below the box. If the button is not appear, playing the video ‘streaming’ for the firt time. I’ll definitely button will appear. just click the download button to download the video immediately.
In the list that appears when you click the download button, please select the quality / type / format of the video you want. Then wait for the download to complete

Read More

How to fix Windows XP corrupted files

It's very easy. You just have to follow these steps:-

Step 1) Place the Windows XP cd in your cd/dvd drive.
Step 2) Go to start>run>cmd>Type sfc/scannow

It will fix all corrupted system files.

Read More

How to chat with your friends using command prompt

If you want to chat with your friends, you just have to know one thing, which is your friend's system's IP Address. You just have to follow these steps:-
Step 1) Firstly, open notepad and copy this code as it is

@echo off

:A

Cls

echo MESSENGER

set /p n=User:

set /p m=Message:

net send %n% %m%

Pause

Goto A

Step 2) Now save this as "Messenger.Bat".

Step 3) Now open command prompt.  Drag this file (.bat file) over to Command Prompt and press Enter.

Step 4) Now, type the IP Address of the computer you want to contact and press enter.

Now all you need to do is type your message and press Enter.
           Start Chatting.......!

Read More

How to Download youtube Video By using VLC Media player

To download youtube video with VLC media player just go through the below post....

  1.open your youtube on your browser then open your video And copy URL.
2.Run your vlc then  click Media->open network stream..

3.then paste URL in 'please enter network URL: '

  4.Then click ' Play '  button in the player.
  5. Then  Now, click Tools – Codec Information and at the bottom of the window you will see a Location box. Copy the long URL in the box and paste it on your browser’s address bar. The browser will now start playing the video file. You can download the video file to your desktop by doing a Save As…. Or you can choose to record the video.

done!!!!!!!

Read More

How to turn off your PC in @ Seconds in XP

We have a new way to shutdown your computer in just 2 seconds. You just have to follow these steps:-

1) Go to Task Manager by pressing combination of Ctrl+Alt+Del or Go to start>run>type taskmgr or by pressing ctrl+shift+esc.
 2) Task Manager will appear. Go to shutdown menu>press Ctrl key and select Turn Off menu item from shutdown, PC will turn off in 2 sec.

It works only in XP because here's no any option of shutdown menu in vista and window 7. However pressing the WINDOWS KEY, then U (SHUT DOWN) and then U (SHUT DOWN) will also do shutdown but it takes the similar time for shutdown as taken by the normal shutdown.

Read More